AN Hose Assembly Tool
Description

AN Hose Assembly Tool

  • Installs braided, stainless steel hose into fittings.
  • Works with nylon, braided AN hose.
  • Works with all brands of AN fittings.
  • Includes spacers and sleeves for different sized sockets.
  • Does not work with PTFE (Teflon) hoses.

Since the invention of braided, stainless steel hose, racers and mechanics have been struggling to install it into the socket part of the AN hose assembly. If you're lucky and get a clean cut on the hose end, you might get it in. Most of the time the hose end is a bit fuzzy and the battle begins. It is not only time consuming, it can get bloody as well.

The AN Hose Assembly Tool fills a need that was long overdue. Just insert the socket into the capsule of the hose assembly tool, twist in the hose, and the assembly is complete in less than ten seconds. There's no need to worry about wear or tear. This tool is made of a high-tech composite and is virtually indestructible. You can even repeat this process several times without re-cutting this hose end.

You'll be amazed at the amount of time you save and pain you avoid by using this tool. Gone are the days of stabbing your fingers with frayed hose ends and scrapping AN hose because it was cut too short. The money you save from buying band-aids alone will pay for the tool.

AN Hose Assembly Tool Details

Small Kit
  • Installs sizes -4,-6,-8 AN hose.
  • Includes sleeve for -4 Russell fitting.
Large Kit
  • Installs sizes -10,-12,-16 AN hose.
  • Includes spacers and sleeves for different sized sockets.
  • All -16s (excepts Russell's brand) use the sleeve and a rear spacer.
  • Most -10s and -12s will use a spacer.
  • See the instructions in the case for the proper spacer number.
Pro Combo Kit
  • Installs sizes -4,-6,-8,-10,-12,-16 AN hose.
  • Includes all the spacers and sleeves from the Small and Large kits
Hot Rod Kit
  • Installs sizes -6,-8,-10, AN hose.
  • Includes spacers and sleeves for different sized sockets.
  • Spacers are used for some -6s, -8s, and most -10s.
  • See the instructions in the case for the proper spacer number.

* AN Hose Assembly Tool does not work with PTFE (Teflon) hose.
* We have additional information on our instructions page, our video page, and our shop tips for AN Hose Assembly.

 

KOUL TOOLS

Phone: 928-854-6706
Email: sales@koultools.com

Photos
External Video
Koul Tools
You need Flash player 8+ and JavaScript enabled to view this video.

Comments
Order by: 
Per page:
 
  • There are no comments yet
Advertisement
Rate
0 votes
Info
CSMRay
Ellenton, United States
10.03.2017 (10.03.2017)
187 Views
0 Subscribers
All Articles by CSMRay
Recommend
Advertisement